30CL-1 & 30CL-2

30CL Hock Cutter/Dehorner

30CL Hock Cutter/Dehorner

Electric-hydraulic powered (30CL-1) and pneumatic-hydraulic powered (30CL-2) fore and hind beef hock and horn cutters.

  • Used for front and hind beef hock cutting through the bone or joint. Also an effective beef dehorner.

  • With a 1.5 second cutting cycle (30CL-1) or a 4 second cutting cycle (30CL-2), it is a high production, high performance tool - used extensively for the most demanding applications.

  • Best possible hygiene with updated, virtually all stainless steel construction - minimal corrosion problems.

  • Small and lightweight for better handling and ease of use.

  • Robust construction, including ground solid stainless steel blades, for long trouble-free life.

  • Anti-tie down controls for operator safety.

  • Meets national and international requirements for safety and hygiene.

Model 30CL-1Specifications:

DriveHydraulic
Cutting Force9900 lbf44 kN
Cutting Cycle Time1.5 sec
Control Handles

Air / Dual Anti-tie Down50 psi3.4 bar
Blade Opening

  At Tips4.0 in102 mm
  Widest5.75 in146 mm
Overall Length32 in813 mm
Weight38 lbs17.2 kg



Power Unit

Motor Power5 hp3728 W
Operating Voltage230 / 460 V, 3 phase, 60 Hz
other voltages and 50 Hz available

Hose Length16 ft5 m
Oil Capacity20 gal76 L
Overall Dimensions28x22.5x28 in
71 x 57 x 71 cm

Weight(without oil)200 lbs91 kg
Model 30CL-2

Specifications:

DrivePneumatic
Cutting Force12375 lbf55 kN
Cutting Cycle Time4 sec
Control Handles

Air/Dual Anti-tie Down50 psi3.4 bar
Blade Opening

  At Tips4.0 in102 mm
  Widest5.75 in146 mm
Overall Length32 in813 mm
Weight38 lbs17.2 kg



Power Unit

Operating Pressure125 psi8.6 bar
Air Consumption

(per cycle at 125 psi)1.98 ft5.6 L
Hose Length16 ft5 m
Oil Capacity3 qt2.8 L
Overall Dimensions11 x 15 x 67 in
28 x 38 x 170 cm

Weight (without oil)80 lbs36 kg